Frank
Most of the Bird elements listed in the their
catalogue with numbers following the "C" are for
rigid transmission line sections. I can't find
the C2 but C1, C12, C3, C32 etc are listed. The
Bird catalogue used to be available at
www.bird-electronics.com The serial number may
denote that it was part of pre-calibrated package.
Paul
Paul Hewitt
WD7S PRODUCTIONS
QRO HOMEBREW COMPONENTS
http://wd7s.home.att.net
> -----Original Message-----
> From: owner-amps@contesting.com
> [mailto:owner-amps@contesting.com]On
> Behalf Of Frank & Barb Ayers
> Sent: Monday, July 02, 2001 6:23 AM
> To: amps@contesting.com
> Subject: [AMPS] Bird wattmeter elemnt question
>
>
>
> Greetings all -
> Most of my Bird wattmeter elements have
> a simple designator on them
> indicating power and frequency range,
> such as 500B, for 500 watts and
> 50-125MHz. I have that is quite
> different. Its designator is "1000C2". It
> has 1000 watts written on it, along
> with the range of 100-250MHz, but unlike
> the others there is a serial number
> embossed in the arrow. Can anybody tell
> me what the addition of the "2" to the
> type number means?
>
> Thanks
> Frank
> W2FCA
>
>
> --
> FAQ on WWW:
> http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests:
> amps-REQUEST@contesting.com
> Problems:
> owner-amps@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|