Amps
[Top] [All Lists]

[AMPS] FT100D driving Alpha 87a

To: <amps@contesting.com>
Subject: [AMPS] FT100D driving Alpha 87a
From: 2@vc.net (2)
Date: Fri, 27 Jul 2001 19:01:43 -0700
>
>Amen , Rich: remember the "power mics." that cber's used many years ago????
>(and maybe still do?? )   carl/ kz5ca

/\  Yes.  I doubt that the malpractice has stopped, Carl.   BTW - faux 
pas instead of "fax pas".  

cheers


>----- Original Message -----
>From: "2" <2@vc.net>
>To: "Peter Chadwick" <Peter.Chadwick@zarlink.com>; "AMPS"
><amps@contesting.com>
>Sent: Friday, July 27, 2001 9:50 AM
>Subject: RE: [AMPS] FT100D driving Alpha 87a
>
>
>>
>> >
>> >Despite the various widely differing opinions on many amplifier subjects
>> >discussed here, there seems to be a general consensus that ALC is not
>always
>> >totally wholly desirable, and can actually be a very bad thing.
>> >
>> >Not many topics can manage that here.
>> >
>> /\   One of the intrinsic problems with ALC is overshoot.  This problem
>> is exacerbated by using too much microphone gain.  Hams criticise CBers
>> for this fax pas -  but there are some Hams who do the same thing.  Mo'
>> ALC is not mo' betta
>> >
>> cheers, Peter
>>
>> -  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
>> end
>>
>>
>> --
>> FAQ on WWW:               http://www.contesting.com/FAQ/amps
>> Submissions:              amps@contesting.com
>> Administrative requests:  amps-REQUEST@contesting.com
>> Problems:                 owner-amps@contesting.com
>>
>>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/amps
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>
>


-  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>