Amps
[Top] [All Lists]

[AMPS] dielectrics

To: <amps@contesting.com>
Subject: [AMPS] dielectrics
From: jtml@lanl.gov (John T. M. Lyles)
Date: Wed, 1 Aug 2001 08:14:26 -0600
W8JI said:

>When you look around and see the industry avoiding a method
>there is almost always a good reason. In this case they are
>probably concerned about loss of Q and heating of the component.
>
>Dissipation factor is the ratio of energy dissipated to energy stored
>per cycle. The dissipation factor would increase greatly if you pick
>the wrong material.
>
>As a second effect when you add a dielectric, energy is more
>concentrated. There is more current in a smaller area. That also
>can increase losses if you don't plan for it.
>
>A third effect is drift. The component will change values with
>temperature.
>
>You need to look at more than capacitance.
>
>Many materials also have an increase in dissipation factor with
>temperature.

Couldn't have said it better Tom, thanks for saying that. Before we 
all get to filling our variables with fluid. I don't know any 
dielectric that is better than air for loss tangent and for 
stability. Well, vacuum is one....

John
K5PRO
-- 

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] dielectrics, John T. M. Lyles <=