Amps
[Top] [All Lists]

[AMPS] Re: [ForSale-Swap] SELL:Low Profile 3-500's and 8877

To: <amps@contesting.com>
Subject: [AMPS] Re: [ForSale-Swap] SELL:Low Profile 3-500's and 8877
From: w2cqm@juno.com (Ronald Lumachi)
Date: Sat, 4 Aug 2001 22:08:36 -0400

SELL: Full output, matched pair of low profile Eimac 3-500's. Tested
(SB220)  at 1100+ watts  output with 100w of drive. Ideal replacements
for lower efficiency 3-400's in early design, minimum chassis 
clearance Drake, Swan and Henry amplifiers. $240pr + shipping/Ins.

SELL: Pair of low profile (horizontality finned) heat dissipating 
plate caps ideal for  minimum clearance applications.   $10+ shipping.

SELL:Peter Dahl 220VAC filament transformer( pair of 3-500's) rated at
5VCT@30amps. Has a 12VAC and  several 105-120VAC taps to control fan
speed.  Package includes a pair of porcelain 3-500 sockets  wired in
parallel with grid to ground straps intact and ready to drop in. 
Includes spacers and chimney clamps.(Removed in new condx from Ameritron
AL82).
$110+shipping/insurance.


SELL: Reduced emission  Eimac 8877 (3CX1500A7). Tested at 1000W (60%)
output in 
an Ameritron AL1500 with 60w of drive and 3.6KV plate voltage. Clean, no
dents or discoloration and date coded 1983. Shipped in original Eimac
foam padded carton. Includes a Johnson drop in air system socket with
grid-to-ground tabs. Ideal candidate for a 6m amplifier project. Can
include a 6m  HV plate choke on a threaded porcelain form at no
additional cost for 50mHz operation. $160+ shipping/insurance. 

 Ron W2CQM/3
>

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>