Amps
[Top] [All Lists]

[AMPS] Linear AMP timing

To: <amps@contesting.com>
Subject: [AMPS] Linear AMP timing
From: n4zr@contesting.com (Pete Smith)
Date: Wed, 08 Aug 2001 14:37:01 -0400
At 08:48 AM 8/8/01 -0700, W7TI wrote:
>
>On Tue, 7 Aug 2001 02:32:15 -0400, Tom Rauch wrote:
>
>>Be sure it opens AFTER the input relays opens also! 
>
>_________________________________________________________
>
>In all this discussion, nobody has mentioned the bias switching.  IMO,
>the amp should not be biased on until all the relays have closed and
>must be biased off before any of them open.

Well, I don't know, but when the T/R relay on my SB-220 began to stick in
the "on" position, it turned out to be the bias contacts that were the
worst burnt.  Maybe a sign that they were trying to open too soon?  


73, Pete N4ZR






--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>