Amps
[Top] [All Lists]

[AMPS] Linear AMP timing

To: <amps@contesting.com>
Subject: [AMPS] Linear AMP timing
From: 2@vc.net (2)
Date: Wed, 8 Aug 2001 18:16:43 -0700
>
>On Tue, 7 Aug 2001 02:32:15 -0400, Tom Rauch wrote:
>
>>Be sure it opens AFTER the input relays opens also! 
>
>_________________________________________________________
>
>In all this discussion, nobody has mentioned the bias switching.  IMO,
>the amp should not be biased on until all the relays have closed and
>must be biased off before any of them open.  
>

/\   Please explain why.
tnx

>Ensure that, and you can rest much easier.
>
>Bill, W7TI
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/amps
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>
>


-  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>