Amps
[Top] [All Lists]

[AMPS] capacitor qestion for NCL-2000

To: <amps@contesting.com>
Subject: [AMPS] capacitor qestion for NCL-2000
From: 2@vc.net (2)
Date: Thu, 30 Aug 2001 07:48:59 -0700
>Hi Richard,
>
>I didnt know for sure how much capacitance I could go
>up to based on the power supply. I knew 80uf was pry
>the minimum for sure. 

//  Indeed

>Do you know how much bigger in
>diameter the 200 is vs the 100uf capactitors? There
>are 8 of those guys in there and Im concerned about
>getting them all jammed in there. Maybe the new caps
>are made smaller with more capacitance? 

//  Yes.   Diameter is the primary concern.  My guess is the originals 
are 35mm dia.  

>Im sure you
>know there isnt a ton of room in the NCL for the
>caps,hihi. Thanks a lot for your response...
>
ur welcome, Mark.  Your experiences in this matter may be useful to other 
NCL owners.  Beware of the original screen supply.  Since there is no 
current limiting, it is a screen killer.  An improved NCL-2000 circuit 
diagram is on my Web site.   
>
>--- 2 <2@vc.net> wrote:
>> >
>> >Hello Everyone,
>> >
>> >Id like to replace the power supply caps in the
>> >NCL-2000 Im working on and need to know a good source
>> >to purchase caps from. I need 8 100 or 120uf caps
>> >at 450-500v. Anyone have any good companies to contact?
>> >Is 120uf a little too much? Its currently got 80uf
>> >installed right now. Thanks and 73,,
>> 
>> //  200uF is about right.  Digi-Key is one source.
>> 
>> cheers, Mark
>> 
>> -  R. L. Measures, 805.386.3734,AG6K,
>> www.vcnet.com/measures.  
>> end
>> 
>
>
>__________________________________________________
>Do You Yahoo!?
>Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
>http://im.yahoo.com
>


-  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>