The following link will take you directly to the Acrobat pdf data sheet
for the HV PCN resistors manufactured by RCD.
http://www.rcd-comp.com/rcdpdf/PCN.PDF
73,
Ken K4XL
k4xl@arrl.net
*** BoatAnchor Manual Archive ***
On the web at http://bama.sbc.edu or
FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr
----- Original Message -----
From: <ToddRoberts2001@aol.com>
To: <amps@contesting.com>
Sent: Saturday, September 08, 2001 11:05 PM
Subject: [AMPS] GLITCH RESISTORS - SOURCE
>
> Check out RCD resistors at www.rcd-comp.com. Go to their resistor page
to HV
> listings - look up PCN SERIES. They have non-inductive solid-ceramic
> construction. Sizes 2W-5W wire leaded would be excellent for standard
> parasitic suppressor construction. Larger sizes 10W-270W designed for
> mounting clips. 50W size rated to 70KV max pulse voltage - dimensions
7.28"
> long x .788 dia. Larger sizes would be excellent for building a custom
> non-inductive dummy load also. 73 Todd Roberts WD4NGG .
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|