Thanks,
I also was considering this, as the 4CX250 or the
replacements can be easy to found and are cheap.
But I'll make something else.
I will remove the 8122 driver module and will use
the 4CX1500B in a passive grid configuration.
73,
Traian
2 wrote:
> >
> >Hi Bill,
> >
> >I was also interested for this.
> >I had search for russian 8122 replacement for
> >a Harris RF110, but I found none.
> >Also, by my catalogue (some old), I didn't find
> >even an approximate replacement.
> >
> // Three250Bs will make as much suds as two 8122s - and 4cx250B screens
> are way more rugged.
>
> cheers, Traian
> >
> >
> >Bill Smith wrote:
> >
> >> Are there any of the Russian tubes that are currently
> >> avaiable that can be used as a replacement for the
> >> 8122 found in the National NCL-2000 amplifier?
> >> 73,
> >> Bill
>
> - R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures.
> end
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|