[AMPS] SB-1000 mods?

[Ian White, G3SEK" <g3sek@ifwtech.com (Ian White, G3SEK)]

2 wrote:
>//   The purpose of the glitch-R is to protect the electron tube from 
>failure during an intermittent oscillation condition. 

Make that "...from failure due to a current surge occurring for *any*
reason."

It's best to keep an open mind about the causes, but by all means
protect against the effects.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.com/g3sek

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com