Amps
[Top] [All Lists]

[AMPS] Noises in electrolytic capacitors

To: <amps@contesting.com>
Subject: [AMPS] Noises in electrolytic capacitors
From: 2@vc.net (2)
Date: Fri, 28 Sep 2001 17:04:32 -0700
>
>2 (Rich) wrote:
>
>> //  (ref SB-1000 and AL-80 owners' manuals)
>> When challenged on his assertion that the 3-500Z was re-rated by Eimac
>> for 500mA 
>
>I don't know why this keeps coming up, 

//  Because Mr. Rauch did produce the alleged letter.

>but the SB-1000 and AL80B manuals talk
>about running the plate current up to 500 ma for a short period during tuning
>only, so that you can tune the tank for the peak conditions that will occur
>during SSB use.  

//  For SSB use, 500mA tune-up is not in the linear region.  

>They specifically say that you should reduce drive in CW to
>give you 400 ma., and make reasonabale statements about the meter swing you
>should expect on SSB.

//  I do not have a manual.  please quote Mr, Rauch's reasonable 
statements.  
>
tnx, Vic

-  R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>