Amps
[Top] [All Lists]

[AMPS] Problem with 160 meters and LK450

To: <amps@contesting.com>
Subject: [AMPS] Problem with 160 meters and LK450
From: john@alleged.com (F. John Rowan)
Date: Fri, 28 Sep 2001 19:56:35 -0500
Heres my problem, when ever I try to use my Amp Supply 
LK450 on 160 meters it shows high SWR readings on my 
Icom and fails to function. It works fine on all other 
bands and I even went as far as to run it into a dummy 
load with no luck. When I look at the grid current on 
160 it isnt showing any draw. If any one has an idea 
please let me know.

Thanks 

 


------------------------------------------------------------------ 
 F. John Rowan    Director of Communications @ BBRH Inc.
 IRC: PuNkSter    HOME: john@tdkt.org     WORK: john@alleged.com
 ONE POLICY, ONE SYSTEM, UNIVERSAL SERVICE           
------------------------------------------------------------------
 This has been an official announcement from BBRH, Inc.
 Use and retransmit of the information contained within is restricted.


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] Problem with 160 meters and LK450, F. John Rowan <=