Hello Xu,
These (axial) fans are not suitable for cooling the 4CX1000 tube,
especially if you want to get high or full output.
Anyway, I saw many russian amplifiers made by UA hams, they
are using such fans for cooling GI7, GU43 (1kW out),
GU74 (600W out), or even GU78 tubes.
Some high speed/high air volume/high pressure axial fan are made
but they use 400Hz AC line (like the one used for Harris RF110A),
and are also very noisy.
The radial (blowers) ones are the best, and
some noise will be allways present...
There are both mechanical and electrical differences
between the GS 35 and the 3CX1500/8877.
If you need I can send you data for both.
73,
Traian
Xu wrote:
> Hi!
> I have many square fans,some of them for 220AC,some of them for
> DC12V,could someone tell me how to cauculate the LPM(litre per minute)
> depend
> on the current of 220V AC and DC12V?I have a pair 30W AC Fan,can use in a
> Chinese FU-100F(4CX1000)?I have a Chinese Military 1.6KW HF SSB
> transmitter(use a FU-100F),but origional fan is too noisy.ps what diffrent
> between
> GS35 and 8877?
>
> 73! de Xu
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|