Amps
[Top] [All Lists]

[AMPS] Re: 3-500Z emission saturation

To: <amps@contesting.com>
Subject: [AMPS] Re: 3-500Z emission saturation
From: 2@vc.net (2)
Date: Wed, 10 Oct 2001 05:22:01 -0700
>
>The same person that is the subject of this:
>>
>>1.) On one hand, claims are made by a certain person a parasitic 
>>can cause enough anode current to "bend filament wires from 
>>magnetic fields". 
>>
>>2.) On the other hand, the same person claims he "starts to see 
>>current saturation at 420 mA".
>>
>>
>This is the same person that believes that low distortion is a bunch of hog
>wash- witness this quote:
>
>>//  The FCC's Paragraph D says that splatter in a ham-band should not go 
>>beyond the band edges, so why make ham stuff as clean as possible?  
>...
//  This is from one version of Part 97 - which are the FCC rules for ham 
radio.  It is not hogwash.  
> ...

-  R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] Re: 3-500Z emission saturation, 2 <=