Chuck,
I have a suitable transformer, as well as ceramic chimneys for 4CX250s.
Can you use a xfmr with 120Vac primary, or do you need it to be 240V?
Let me know...
73 Steve WB2WIK/6
"Each success only buys an admission ticket to a more difficult problem." --
Henry Kissinger
> -----Original Message-----
> From: Partain, Chuck [SMTP:Chuck_Partain@Maxtor.com]
> Sent: Friday, October 12, 2001 6:38 AM
> To: 'amps@contesting.com'
> Subject: [AMPS] parts needed for 4cx-250 amp I am building
>
>
>
>
> OK, I am still on the trail for parts for my HF 4cx-250 amp. I thought I
> had
> a plate transformer
> but that fell thru. Looking for these items now, maybe someone can help.
>
> plate transformer ~1500v .5a
> sk606 ceramic chimmeny
> and I walked all around the hopkington NH flea market and found no good
> cases to build
> the amp in or on. suggestions? A 16x14x4" bud chassis to start on was 60$
> at
> u-do-it electronics!
> i really didn't wanna go that route. what do other folks use for chassis?
>
> thanks!
>
> Chuck Partain
> maXtor Corp
> Shrewsbury, MA
> 508-770-3496
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|