The 4CX250's require around 1700-2000 volts for good operation though... They
will operate at the lower voltage though.
I have some 4CX250FG's I'm saving for an amp...
skipp isaham wrote:
> Bill,
> I'm in a conversation with an Italian Amateur who has
> retrofit his Dentron GLA-1000 with 4cx250's. We are
> trying to work out a few of the details via Email. I'm
> trying to get him to snap some pictures for placement
> on the sonic server.
> -
> skipp
> [snip]
> --------- Forwarded message ----------
> From: Bill Smith <ko4nrbs@yahoo.com>
> In the Dentron GLA-1000 series of amps I would like to
> convert one to a non-sweep tube but keep the exisiting
> power supply. I want to maintian it's small size and
> fairly light weight. The power supply is a little
> whimpy @ about 1150 to 1200 vdc and at about 1 amp
> max. Is there a tube out there I could use that would
> provide about 500 watts or so of power on 80-10
> meters? I only have about 4 inches of vertical height
> to work with.
> 73,
> Bill
jim
--
ET has one helluva sense of humor!
He's always anal-probing right-wing schizos!
-----------------------------------------------------
POWER TO THE PEOPLE!
-----------------------------------------------------
"Religious fundamentalism is the biggest threat to
international security that exists today."
United Nations Secretary General B.B.Ghali, 1995
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|