>
>Hi Gents,
>
>I have a roller inductor that is made of 3/8" wide silver-plated
>copper "ribbon". A shaft and the "pinch" roller that travels on it is
>lubricated with an unknown type of grease. The roller coil is also dirty
>and greasy and needs cleaning. I will want to replace the grease
>on the pinch roller shaft and *perhaps* on the coil too, but what
>kind of grease should I use?
>
Graphite-grease seems to work ok if the copper is polished with fine
steel wool before it's applied.
cheers, Charlie
- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|