[AMPS] Reverse-engineering design plate HV

[jflanders2@home.com (Jerry Flanders)]

In an old 5CX3000A 1.6-32MHz amp I am working on, the plate blocking caps 
are rated at 8KV. Can I guesstimate from this what plate voltage was 
intended? It was made by TMC, presumably to commercial or military specs.

If it helps, it has vacuum variable caps in the tank rated at 5KV.

Jerry W4UK 


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com