Amps
[Top] [All Lists]

[AMPS] ALC connection

To: <amps@contesting.com>
Subject: [AMPS] ALC connection
From: kc5ajx@hotmail.com (Rick Bullon)
Date: Sat, 24 Nov 2001 19:08:46 +0000
Hello all
I have been studding how to connect my Cliperton-L amp up to my TS-940. I 
have seen the circuits for using a transistor to switch the keying on the 
amp and I have looked at the various websites that sell the cables that have 
the keying circuit built into to the cable.
All these methods handle the keying of the amp from the rig but none of them 
have provisions for the ALC line from the pin on the rig to the ALC plug on 
the amp.
So my question is how do you handle this?
I figure if I build my own keying box I can run a separate line from the pin 
on the din plug to the ALC connection but of all the examples I have seen of 
these none have a line for the ALC.
I know this is a very simple question compared to some of the high tech 
threads on here but I am a novice when it comes to amps. All I have done 
with mine so far is turn it on and make sure all the lights and meters work.

I have one more question. My amp was shipped to me with the tubes 
uninstalled. I have taken the top off the amp mainly to make sure nothing 
was broken and that the 10 meter mod was done.
My questions is where the 4 572B tubes go there are 3 copper straps with 
rings on the top. I assume that these attach to the top of the tubes. Which 
of the 4 tubes do the three straps go on? Or is there suppose to be 4 straps 
and one is missing?
73
Rick
KC5AJX
Amp Newbie

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>