Amps
[Top] [All Lists]

[AMPS] Screen supply regluation???

To: <amps@contesting.com>
Subject: [AMPS] Screen supply regluation???
From: 2@vc.net (2)
Date: Mon, 26 Nov 2001 11:46:43 -0800
>
>Greetings,
>
>I recently completed prototyping my (all tube) screen
>supply/regulator and the question came to mind, "How
>much regulation is sufficient".  In initial testing it
>would appear that the circuit is capable of < 0.5%
>regulation ( less that 2 volts @ 400V ) at load
>currents ranging from 0 to just over 200mA.  
>
>Would this be considered adequate?

Yes, especially for SSB where the duty cycle is such that avg screen 
current is c. 20% of that for AØ operation.   However, for tubes with a 
400v screen, reverse screen current is often considerable, so a 25% (of 
screen-I) bleeder should be connected across the screen.  

cheers, Randy

-  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>