This is a multi-part message in MIME format.
------=_NextPart_000_0035_01C17789.E4D6ECC0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Having read everything I can find here and elsewhere about hooking up a =
TS-940 to a SB-200 I have decided to ask fo help. The remote output of =
the 940 uses pin 6 for ALC, pin 4 for the amp relay, and pin 2 as the =
ground. With this hookup I get no closure or voltage between pins 2 and =
4. I do get closure between 4 and the outside of the din connector. =
When hooked up to the SB-200 there does not seem to be any keying (ie. =
no plate current). There is HV on the amp and everything else works on =
the 940. The amp was supposedly in working order when taken off-line =
years ago. Any suggestions as to where to start looking?
Thanks,
Barry KW8W
barrys@core.com
------=_NextPart_000_0035_01C17789.E4D6ECC0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D2>
<DIV><FONT size=3D2>Having read everything I can find here and elsewhere =
about=20
hooking up a TS-940 to a SB-200 I have decided to ask fo help. The =
remote=20
output of the 940 uses pin 6 for ALC, pin 4 for the amp relay, and pin 2 =
as the=20
ground. With this hookup I get no closure or voltage between pins =
2 and=20
4. I do get closure between 4 and the outside of the din =
connector. =20
When hooked up to the SB-200 there does not seem to be any keying (ie. =
no plate=20
current). There is HV on the amp and everything else works on the=20
940. The amp was supposedly in working order when taken off-line =
years=20
ago. Any suggestions as to where to start looking?</FONT></DIV>
<DIV><FONT size=3D2>Thanks,</FONT></DIV>
<DIV><FONT size=3D2>Barry KW8W</FONT></DIV>
<DIV> </DIV>
<DIV><A=20
href=3D"mailto:barrys@core.com";>barrys@core.com</A></DIV></FONT></DIV></B=
ODY></HTML>
------=_NextPart_000_0035_01C17789.E4D6ECC0--
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|