At 12:30 PM 2/28/02 -0800, you wrote:
Paul,
I see you are using a pressurized compartment and no chimney on the
YC-156. I dont know what your design power level is but it would seem to
me that you have reduced the tubes capability appreciably. With 300 watts
of filament power to dissipate you might
not have much left for plate dissipation. What power level did you expect
from your design??
Norm N8NH
>Finally fired up the YC-156 50mhz amp.
>For those interested, I've posted some
>specs and early test numbers in
>gallery-4 on my site.
>Warning!! Semi-Commercial website
>Paul
>
>PAUL HEWITT
>WD7S PRODUCTIONS
>QRO HOMEBREW COMPONENTS
>http://wd7s.home.att.net
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
|