[Amps] Good Source for HV Probe?

Amps

[Amps] Good Source for HV Probe?

from [Ron]

To:	<amps@contesting.com>
Subject:	[Amps] Good Source for HV Probe?
From:	w8ron@stratos.net (Ron)
Date:	Tue, 26 Mar 2002 22:55:07 -0500

A 90 Meg resistor will get you to 10 KV assuming that you input impedance of
your meter is 10 Meg as most are.
---
Ron
.

Gerry Hull wrote:

> Hey Gang,
>
> In doing a search around the web I'm coming up pretty empty for a source
> for a good (hopefully inexpensive) HV Probe.  My DVM is rated for 1KV
> max.  Any ideas?
>
> 73,  Gerry, W1VE
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Good Source for HV Probe?, Gerry Hull [Amps] Good Source for HV Probe?, Gary Schafer [Amps] Good Source for HV Probe?, PAUL HEWITT [Amps] Good Source for HV Probe?, Ron <= [Amps] Good Source for HV Probe?, K6KWQ@aol.com [Amps] Good Source for HV Probe?, Gary Schafer [Amps] Good Source for HV Probe?, Richard [Amps] Good Source for HV Probe?, <g3sek@ifwtech.co.uk (Ian White, G3SEK)

Previous by Date:	[Amps] Re: [Amps] Bird® 43 Manual, Gary Schafer
Next by Date:	[Amps] SB-220 tuning cap needed, wb4mnf
Previous by Thread:	[Amps] Good Source for HV Probe?, PAUL HEWITT
Next by Thread:	[Amps] Good Source for HV Probe?, K6KWQ@aol.com
Indexes:	[Date] [Thread] [Top] [All Lists]