Cleaning house a bit and offering the following components for the
amplifier builder All prices are plus shipping. See
http://photos.yahoo.com/W2CQMRon and click on "ampParts" for a digital
of what's offered.
Item #1: High quality 8877/3CX1500A7 air system socket mounted on air
system subchassis. Complete with grid to ground straps-Ready to drop in.
$45
#2: 8877 porcelain socket with spacers for sub chassis mounting-no grid
to ground tabs $15
#3: 8877 self contained air system socket ready to drop in. No grid to
ground tabs $15
#4: 8877 full body chimney with spring loaded tabs for easy HV anode
hookup New $25
#5: 8877 Heavy duty solid teflon heavy wall chimney $35
#6: National Radio stacked bobbin HV plate choke 1 amp $10
#7: HV plate choke on solid Delrin rod 1 amp $12
#8: Heavy duty 5KW HV plate choke wound with #20 enameled wire on 1"
solid porcelain rod. Drilled on each end for easy mounting $35
#9: B&W 800 HV plate choke clone wound on teflon rod 1 amp $15
#10: 5KW 2P6T porcelain Radio Switch with position lockout and detents.
Keyed and drilled for 5 additional easily installed "L" terminals for
2P11T operation. Like new $75
#11: Pair of OEM Drake L4B Starburst cast aluminum 3-500 plate caps with
hdwe. HARD TO LOCATE AT ANY PRICE! $35
#12: Hallicrafters HT33 HV filter capacitor 10mfd@3KW $12
#13: OEM Drake L4B 3-500 sockets factory wired in tandem. Complete with
capacitors and grid chokes. Removed intact with no cut wires and ready
to drop in. $35
#14: Hallicrafters HT33 bleeder resistor 50K@100W w/mounting hdwe $15
#15: Eimac 4CX300A (Clean but condition unknown), pair of # 606 Eimac
porcelain chimneys, and the complete HV/parasitc choke assembly for the
3CX300A's. sockets complete package (tube sold with no expressed or
implied warranty) Ron W2CQM/3 $40
Epilogue: visit www.QRZ.COM/W2CQM for a listing of the most recently
authored amateur radio related articles by W2CQM.
|