Thanks for all the replies regarding the DX2000L transformer. For those
that asked and are checking the junk boxes here is the pertinent info:
laminations are 3.75" x 3.125"
mounting holes 2.5" x 3.125"
stack thickness 2"
all leads on one coil face
shell .875" above top of stack (one side only)
The laminations are 1.25" H (1.25"HS could also be used) this is from
Thomas Skinner manufacturer, mini-log VI, pg 63.
I have a local who could wind it for me if I/he could find a small quantity
of laminations for the job because the laminations have to be replaced and
there is a minimum quantity for a regular order.
Thanks again for all your time,
Mike W9RE
>My old Raytrack HF amplifier DX2000L (pair 3-500z's) filament transformer
>(5VAC @ 30amps plus a 12VAC relay power (low current)) bit the dust. By
>some strange chance does anybody have any idea where to get a replacement
>the exact same size (tight fit)? I have a quote from Dahl and just
>wondering if there are any other options. I had sold the amp and the
>transformer went up in smoke when the new owner turned it on so now it's my
>problem.
>
>Mike W9RE
|