Amps
[Top] [All Lists]

[Amps] Tube characterization

To: <amps@contesting.com>
Subject: [Amps] Tube characterization
From: alex@mail.sandlabs.com (alex)
Date: Sat, 6 Jul 2002 19:26:28 -0400
you know this is not true :) Next time use a HV probe to measure the B+ :)
Alex....

Hmmmm... B+ as LSD ???? Hmmmm .... 






> -----Original Message-----
> From: amps-admin@contesting.com [mailto:amps-admin@contesting.com]On
> Behalf Of Richard
> Sent: Saturday, July 06, 2002 7:13 PM
> To: alex; Richard; AMPS
> Subject: RE: [Amps] Tube characterization
> 
> 
> All of the characteristic curves one needs are free on the Internet.
> 
> >
> >Sour grapes ? R U measuring the HV Power supply by sticking your 
> fingers in
> >it ?
> >Alex
> >
> >
> >
> >> -----Original Message-----
> >> From: Richard [mailto:2@mail.vcnet.com]
> >> Sent: Saturday, July 06, 2002 1:40 PM
> >> To: Alex; AMPS
> >> Subject: Re: [Amps] Tube characterization
> >>
> >>
> >>
> >>
> >> >I have developed characterization tables for 8877 3cx5000
> >> 3cx10000 3cx15000
> >> >families.
> >> >Tables include input/output impedance versus frequency versus
> >> Grid and Anode
> >> >Current
> >> >(in 50KHz steps) at various power levels from 1% to 100% in 15%
> >> power step.
> >> >All in GG mode.
> >> >Sept 10 2002 we will release the GK tables.
> >> >
> >> >
> >> >Price per table is $10K. We will characterize YOUR tube for $20K.
> >> >
> >> *  Chortle.
> >> >
> >> >Alex
> >>
> >> -  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
> >> www.vcnet.com/measures.
> >> end
> >>
> >
> >_______________________________________________
> >Amps mailing list
> >Amps@contesting.com
> >http://lists.contesting.com/mailman/listinfo/amps
> >
> 
> 
> -  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
> www.vcnet.com/measures.  
> end
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

<Prev in Thread] Current Thread [Next in Thread>