[Amps] Filter

To:	<amps@contesting.com>
Subject:	[Amps] Filter
From:	andromeda@seanet.com (Dennis Watkins)
Date:	Mon, 12 Aug 2002 12:22:31 -0700

Is it necessary to use a bifilar winding choke (for GG amp)
for filament or can two separate ferrite rods be used??

Dennis   W7JX

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Filter, Dennis Watkins <= [Amps] Filter, Phil Clements [Amps] Filter, Dennis Watkins [Amps] Filter, Phil Clements [Amps] Filter, wb8jkr@juno.com [Amps] Filter, Koehl_House [Amps] Use of 60Hz blowers on 50Hz mains for cooling ceramic triodes/tetrodes, Michael J. Tubby B.Sc. (Hons) G8TIC [Amps] Use of 60Hz blowers on 50Hz mains for cooling ceramic triodes/tetrodes, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] Transformer Noise, John [Amps] Transformer Noise, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] Use of 60Hz blowers on 50Hz mains for cooling ceramic triodes/tetrodes, Jeffrey Madore

Previous by Date:	[Amps] Contesting.com List Users, Bill Fisher, W4AN
Next by Date:	[Amps] Filter, Phil Clements
Previous by Thread:	[Amps] Contesting.com List Users, Bill Fisher, W4AN
Next by Thread:	[Amps] Filter, Phil Clements
Indexes:	[Date] [Thread] [Top] [All Lists]