811's really don't lend themselves to 50 MHz operation! There's a tube that
was developed and marketed before the six meter band existed, and 100 MHz
was called "UHF." I wouldn't go that way...
-WB2WIK/6
"If everything seems under control, you're just not going fast enough." -
Mario Andretti
> -----Original Message-----
> From: Scott R. Hotchkiss [SMTP:w4pj@bellsouth.net]
> Sent: Tuesday, August 27, 2002 3:10 PM
> To: amps@contesting.com
> Subject: Re: [Amps] Yaesu FL2100B to 6 Meters?
>
> ----- Original Message -----
> From: "Steve Katz" <stevek@jmr.com>
> Parallel 572B's don't lend themselves to 50 MHz operation.
>
>
> What about 811's ?
>
> I have RF-deck socketed for 2 x 811 or 572's in 19" rack
> with filament xfrmr + 12v relay xfrmr - no HV supply
> 5 pos band switch and torroid tank L set up for 10-80m
> also a small 19" cabinet small enough for a medium/large desktop.
> Probably could fit a HV supply inside.
> Have schematic for deck + schematic for [missing] HV/PS originally had
> 572's
> sorry, no pictures.
> $75 as-is dusty - you ship.
>
> Scott / W4PJ
>
>
> > -----Original Message-----
> Yaesu FL2100B to 6 Meters?
> > Has anyone done a conversion of this amp to 6 meters? I would really
> like
> to correspond with someone who has actually converted one.
> > Ron, KA9ALC
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|