Mark WB8JKR wrote:
>The EBS circuit goes in the cathode/grid path, I.E. cathode
>to ground (grid). It is installed from the anode of the bias zener to
>ground
>(grid) and the B- goes to the junction of the bias zener cathode and the
>tube cathode in a cathode driven amp. So in effect, the EBS is in series
>with the tubes cathode - grid path.
Ahh - when you mentioned 250s on 2m I jumped to the assumption that it would
be the regular grounded cathode, grid driven arrangement and I couldn't
figure how the capacitor helped in that situation.
73, Steve
|