I have heard of 5kV for SSB only using g-g config. However, tuning up
with pulses or dits is probably not a bad idea. Also, more anode-V
yields more gain. This is both good and not good, so one should take
appropriate measures to avoid fireworks.
>Greetings,
>
>Wondering, if anyone has ever exceeded 4KV on a 4-400.
> My present junkbox stock of plate transformers puts
>me at either below 3200 or at 4500-4600 volts.
>Curious as to how the tube would operate above it's
>rated maximum.
>
>FWIW: I planned to run the tubes with regulated screen
>& bias supplies.... 500 or so volts on the screen.
>
>
>Many thanks
>
>
>
>=====
>Microsoft is not the answer.
>Microsoft is the question.... and the answer is NO!
>
>Randy (AD5GB)
>
>__________________________________________________
>Do you Yahoo!?
>Y! Web Hosting - Let the expert host your web site
>http://webhosting.yahoo.com/
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
|