[Amps] Bird 1000H slug adjustment?

[oz1pif@get2net.dk (Peter Frenning, OZ1PIF)]

Hi Ian & Group,

It's dicey, but it can be done; Underneath the Teflon cover, you'll find the
pick-up, and it's possible to adjust the forward and reflected values by
carefully bending these two parts.

Vy 73 de OZ1PIF, Peter

**********  OZ1PIF **************
email: oz1pif(no-spam-filler)@get2net.dk
http://hjem.get2net.dk/oz1pif
Ph. +45 4619 3239
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
***********************************
----- Original Message -----
From: "Ian White, G3SEK" <G3SEK@ifwtech.co.uk>
To: <amps@contesting.com>
Sent: Saturday, October 26, 2002 11:30 PM
Subject: [Amps] Bird 1000H slug adjustment?


> Does anyone know how to adjust a Bird 1000H slug (1kW 2-30MHz)?
>
> It's reading only 400W when a known good slug reads 1000W, but there
> seem to be no trimpots or other adjustments inside.
>
> --
> 73 from Ian G3SEK         'In Practice' columnist for RadCom (RSGB)
>                             Editor, 'The VHF/UHF DX Book'
> http://www.ifwtech.co.uk/g3sek
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>