----- Original Message -----
From: Dan Fitch <oldjags@cfl.rr.com>
To: Guillermo <nagato@arnet.com.ar>; <amps@contesting.com>
Sent: 01 November 2002 04:54
Subject: RE: [Amps] Re: Amps digest, Vol 1 #357 - 15 msgs/INRUSH CURRENT
PROTECTION
> It would be interesting to look at the surge current, with and without a
> lamp in the primary, by measuring the voltage across a small resistance
> placed in series with the capacitor bank. A single trace o-scope could be
> used if the grounded side of the capacitor bank could be disconnected from
> ground and a resistor (1 ohm or less) inserted.
It's also interesting to leave the resistor in there and look at the current
when you load up the PSU output.
Steve
|