I'm not familiar with that specific switch but I would suspect that some of
the "extra" pins are for position tell-back.
Peter
----- Original Message -----
From: "Glenn McNeil" <vk4tzl@bigpond.net.au>
To: <amps@contesting.com>
Sent: Sunday, November 03, 2002 4:02 AM
Subject: [Amps] Transfer Switch
>
> Greetings all...
>
> I've just come across two Transco Transfer Switches...type 1460-430-95.
These things are
> 115vac, 4 port devices. Does anyone have any idea of the pinouts on the
cannon plug on the end
> of the thing...its a round cannon plug, with 6 pins labelled A, B, C, D, E
and F.
>
> I've never used one before and can't quite work out why all the pins.
>
> 73
>
> Glenn
> VK4TZL
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
|