Amps
[Top] [All Lists]

[Amps] Fw: 4-400A in Grounded Grid

To: <amps@contesting.com>
Subject: [Amps] Fw: 4-400A in Grounded Grid
From: nospam4me@juno.com (skipp isaham)
Date: Sun, 10 Nov 2002 09:07:14 -0800
Hi Jim,
-
Yep, a lot of 4-250a, 4-400a plug and play has been done 
through the years. For a new project, I would separate 
the grids and provide control bias to G1.  The series 
zener in the filament xmfr return works very well, but 
another option is a very simple negative bias supply 
(obtained via the heater windings) and a resistive 
voltage divider. 

Concerns about the supply regulation are noted but 
do not appear to be a problem with modest but 
respectable supply divider currents in AB2 
applications I've built. The addition of a bias 
supply shunt regulator is very easy. 

While not appearing as simple as the zener bias 
method,  the supply method has a measure of 
variable control bias using tap/slide resistors or 
an adjustable regulator.  

The advantage would be an easily adjusted range 
of available control grid bias potentials for same 
family tube swaps. Once built, the supply adjustment 
does not require additional parts (diode) changes. 

But, for a one time build, set and play... its hard 
to be the simplicity of the diode set bias method. 

cheers
skipp


--------- Forwarded message ----------
From: Jan Erik Holm <sm2ekm@telia.com>
Could be but the best amp I ever built was with 3 x 4-400A in GG,
no parasitics no mickey mouse stuff it just runs and runs, could I
have been lucky perhaps.
Has around 4 kV on it and pinns the 1 Amp plate meter, puts
out around 2.5 - 2.7 or so with 200 W drive, sure big difference
compared to my 4-1000A amp which is nothing but head ache,
why oh why was I so stupid that I did build sutch an amplifier.

73 Jim SM2EKM

PS: Remember that I once put 4-250A?s in an SB-220, I just
shorthed out the zener and it worked quite ok.


________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com

<Prev in Thread] Current Thread [Next in Thread>