Bill
Anode voltage, kV: DC 2.2KV min to 4.2 KVmax A good working voltage for
this tube is 3000v to 4000v
I am working on one myself right now and will see in a few weeks when i
get it all together what it really Likes.
I have seen 2 single band 10 meters GU-84B amps in the last month that
ran around 3600-4000 and they did just fine. A real Barn Burner.
I have a little info about them on my page
http://www.angelfire.com/nb/ni4l/gu84b.html
Some drawings and pics. I would like to see more pics of the HF built
ones if anyone has any.
Its a slow process Finding all the parts i need has been rough i still
need a few resistors etc.
And i would like to thank everyone here that has helped me out with this
project so far.
Chris NI4L
Bill Smith wrote:
>I see many people use an Anode Voltage of up to 4000
>volts on these tubes even though it is only rated for
>a max of 2200 volts anode voltage. Are they just
>pushing the envelope or is the tube rated for the
>higher voltage?
>
>73, Bill Smith KO4NR
>
>=====
>Bill Smith KO4NR
>
>__________________________________________________
>Do you Yahoo!?
>Yahoo! Mail Plus ? Powerful. Affordable. Sign up now.
>http://mailplus.yahoo.com
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>
--
NI4L CUSTOM RESONANT DIPOLE
LEGAL LIMIT ++ CUSTOM MADE CENTER FED DIPOLE
Made with the same components used by our military forces today
Custom made to YOUR FREQUENCY of operation
Let me take the hassle out of making a RESONANT DIPOLE for you.
Click here for more info... http://www.angelfire.com/nb/ni4l/
|