Amps
[Top] [All Lists]

[Amps] Re: Chassis cleaning

To: <amps@contesting.com>
Subject: [Amps] Re: Chassis cleaning
From: philk5pc@tyler.net (Phil Clements)
Date: Tue, 14 Jan 2003 12:56:27 -0600
> One step beyond, and just make up a new chassis... it's really not all that
much
>
> work or that hard to do.
>

I have quite a bit of experience with this deck.
If you are going for just single-band, and can get it cleaned up per Bear's
advice, that is okay.

If you are planning a roller tank coil, or band switch,  or Pi-L tank, you will
find that you will run out of room in the box with adequate sized
coils/components
installed. I would opt for a new chassis, at least 6-12 inches deeper than you
now
have. 5-6 kv and lots of suds generated need some room!
(((73)))
Phil, K5PC




<Prev in Thread] Current Thread [Next in Thread>