[Amps] How to connect the SB-200 to a Kenwood TS-450S

[2 at vc.net (2)]

Pin 2 is N.O. -- pin 4 is gnd on Kenwood radios.  However, the TS-450 
will not handle negative or positive 110vdc.  The easiest fix is to 
convert the SB-200 to std positive V switching, and install a NPN 
transistor in place of the TS-450's amp control relay.  See:
http://WWW.VCNET.COM/measures/440.html

>Can someone please describe to me how is the connection made from the
>Heath SB-200 to the Kenwood TS-450S
>Thanks All
>Alvaro KC6VQH
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>


-  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
www.vcnet.com/measures.  
end