I sure would like to get my hands on some of those kits. !! Anyone know of
any.???> for a photocopy of my license and a few bucks (I don't recall how
many),
> they
> sent me a 10 meter kit which included a brand new front panel with 10
> meters
> marked on it, some input components, etc..
carl / kz5ca
----- Original Message -----
From: "Steve Katz" <stevek@jmr.com>
To: "'Vic Rosenthal'" <vic@rakefet.com>; "Amps reflector"
<amps@contesting.com>
Sent: Thursday, February 06, 2003 2:00 PM
Subject: RE: [Amps] Heathkit HL-2200
> Hi Vic, same probably goes for the HL-2200.
>
> BTW I see by my logbook we worked on 160m CW the other day...right about
the
> same time I snagged AH3D. C ya on top band again. -Steve, WB2WIK/6
>
> "Success is the ability to go from failure to failure with no loss of
> enthusiasm." -Winston Churchill
>
> > -----Original Message-----
> > From: Vic Rosenthal [SMTP:vic@rakefet.com]
> > Sent: Thursday, February 06, 2003 10:13 AM
> > To: Amps reflector
> > Subject: Re: [Amps] Heathkit HL-2200
> >
> > Steve Katz wrote:
> > >
> > > Isn't another difference that the SB220 had a 10m position on the
> > bandswitch
> > > and the HL2200 didn't? -WB2WIK/6
> >
> > I'm not sure about this amplifier, but in 1979 I built an SB201 (the
> > FCCized
> > version of the SB200). It did not come with a 10 meter position marked
on
> > the
> > front panel, and the bandswitch had a stop at the 15 meter position. In
> > return
> > for a photocopy of my license and a few bucks (I don't recall how many),
> > they
> > sent me a 10 meter kit which included a brand new front panel with 10
> > meters
> > marked on it, some input components, etc..
> >
> > Vic K2VCO
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|