Amps
[Top] [All Lists]

[Amps] Non-Inductive WW Resistors

To: <amps@contesting.com>
Subject: [Amps] Non-Inductive WW Resistors
From: sentek at sprintmail.com (Floyd Sense)
Date: Sat Feb 8 19:40:48 2003
I seem to recall that some of the "non-inductive" resistors accomplished
that by having two separate windings, in opposite directions.
K8AC
----- Original Message -----
From: <MorgusMagnificen@aol.com>
To: <amps@contesting.com>
Sent: Saturday, February 08, 2003 7:16 PM
Subject: [Amps] Non-Inductive WW Resistors


> Actually, you naysayers are jumping on the guy pretty hard without doing a
> little homework first. Those great radio minds of the 40's had some very
> clever ideas for unusual winding geometries that reduced inductance
> considerably, particularly for use in precision resistors and attenuators.
>
> If you are really interested, take a look in the first Chapter of Terman's
> 'Radio Engineering'.
>
> Eric von Valtier K8LV
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>


<Prev in Thread] Current Thread [Next in Thread>