>
>When designing a HV PSU is there a reccomended formula for determing the
>total amount of capacitance required in the filter..
Depends on the filter type, mains Hz, 1 or 3 phase, and the rectifier
config. There are some estimation formulae on my Web site for 1-phase.
>
>I have not seen much discussion on this subject and now I am about to
>design and build a 4kV supply @ 500mA and am just interested in what would
>be a good amount of capacitance to use for this design..
>I have studied many designs that are available but no-one seems to give
>the required information as to why they used the amount they did in the
>design..
>
> Regards Rick
>
>
>
>
>It is the soldier who salutes the flag,
>serves under the flag
>and who's coffin is draped by the flag,
>who allows the protester to burn the flag.
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
- R. L. Measures, a.k.a. Rich..., 805.386.3734, AG6K,
www.vcnet.com/measures.
end
|