You're kidding, right?
"Success is the ability to go from failure to failure with no loss of
enthusiasm." -Winston Churchill
> -----Original Message-----
> From: W0YR@aol.com [SMTP:W0YR@aol.com]
> Sent: Tuesday, February 25, 2003 9:18 AM
> To: amps@contesting.com
> Subject: [Amps] KNOB ORIENTATION
>
> Thanks to all who responded to the inquiry regarding pointer orientation
> on
> an antenna loading capacitor shaft knob. The answers were about 50/50 in
> favor of having the pointer show the highest reading when there is the
> least
> capacitance.
>
> My follow up question is whether it is better to calibrate the scale from
> 0 -
> 180 degrees or from 0 - 100, which are just arbitrary marks. Further, I'd
>
> like to have some suggestions as to knob size and the recommended number
> of
> set screws...and...this is important....whether they should have slotted
> screw heads or heads requiring an Allen wrench.
>
> Any help appreciated.
>
> 73
>
> W0YR
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|