Thanks for all of the replies, gents. Lots of good
suggestions for replacements sources!
I will probably replace all of the caps and the
equalizing resistors in the HV supply just to play
it safe.
73 de Mike, W4EF..............................
----- Original Message -----
From: "Michael Tope" <W4EF@dellroy.com>
To: "AMPS" <amps@contesting.com>
Sent: Wednesday, February 26, 2003 11:39 PM
Subject: [Amps] HV Filter Caps
> Can anyone recommend a source for good computer grade
> electrolytics? I just had one let go in the HV supply of a
> Henry 2K-D (miniature Mt. St. Helens). The specifcations
> are as follows:
>
> Electrical: 180 MFD x 450 WV
>
> Dimensions: 4.125" x 1.375" (radial lead/screw terminal)
>
> Part Number/Date Code Markings: FAH 180-450-A3, CDE 8232 and 8226
>
> Thanks,
>
> Mike, W4EF.............................
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
|