Why not stick with 4CX250Bs? The power supply in the 6n2 T-bolt can't
deliver more than about 1 kW DC anyway, seems like 4CX400s or a 4CX800 would
be a bit overkill for the rest of the amp. -WB2WIK/6
"Success is the ability to go from failure to failure with no loss of
enthusiasm." -Winston Churchill
> -----Original Message-----
> From: Roger D. Johnson [SMTP:n1rj@pivot.net]
> Sent: Wednesday, May 07, 2003 7:14 AM
> To: AMPS
> Subject: [Amps] Johnson 6N2 kilowatt
>
> Has anyone done a conversion to a 4CX800? I
> originally intended to use a pair of 4CX400
> but they seem to be scarce compared to the
> 800s.
>
> 73, Roger
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|