>N3300 3 amps @1mhz 400pf quantity 4 7.5kv
>
? Tnx. This type of dielectric is not rated for tuned circuit applications,
however it works ok for bypass and coupling applications. For 1.8MHz padders,
2000v mica caps are good. See Cornell-Dublier Web site for the nitty gritty.
cheerz
>
>Lynn NO9Z
>
>
>
>2 wrote:
>
>> >Hello,
>> >
>> > I am almost finished with the new homebrew yc156 amp.
>> >It works fine on 15 - 80 meters but I am having a problem with
>> >160.
>> >
>> > With 5000 watts in, I am getting about 1200 watts out.
>> >
>> > I have added inductance to the plate and cathode chokes, changed
>> >(padder caps for the load to 400 pf/ 7.5kv) ,
>>
>> ? Please describe padder caps and give RF current rating at 1MHz. tnx
>>
>> >and setup the tank
>> >several
>> >times. The blocking cap is a 1900 pf .
>> >
>> > THe other sympton is that grid current is much higher on 160 than
>> >all the other bands.
>> >
>> >what am I missing?
>> >
>> >TIA for any assistance
>> >
>> >Lynn NO9Z
>> >
>> >
>> >
>> >_______________________________________________
>> >Amps mailing list
>> >Amps@contesting.com
>> >http://lists.contesting.com/mailman/listinfo/amps
>>
>> Rich, AG6K, 805-386-3734, www.vcnet.com/measures
>
>
Rich, AG6K, 805-386-3734, www.vcnet.com/measures
|