Dave said
>We've done a few solder-bumped WSPs, with 20mil
>(0.5mm) center-to-center spacing on the pads. There
>are rumours that industry is going to head towards
>0.4mm and even 0.35mm, but they will reach a limit.
We're using 10 mil (.25mm) spacing on a 40 'pin' WSP package. Not my
choice, but there.....
I'm beginning to think that moving to octal tube sockets was pushing it a
bit far!
73
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|