Amps
[Top] [All Lists]

RE: [Amps] AMP RATING FOR HEC CERAMIC CAPS

To: "Norman Hockler" <norsan@bright.net>, <amps@contesting.com>
Subject: RE: [Amps] AMP RATING FOR HEC CERAMIC CAPS
From: "PAUL HEWITT" <wd7s@att.net>
Reply-to: wd7s@att.net
Date: Mon, 13 Oct 2003 14:56:25 -0700
List-post: <mailto:amps@contesting.com>
Hi Norman
You didn't spec a frequency.  This may get you close,
http://www.rfparts.com/caps.html#doorknob  Or e-mail HEC at the link on this
page http://www.highenergycorp.com/ceramic/rftransmit.html  I don't see the
ht-50's listed anymore.  Probably not a good choice below 5mhz at legal
limit, not a very good temp-co number available either.
73, Paul

PAUL HEWITT
WD7S PRODUCTIONS
QRO HOMEBREW COMPONENTS
http://wd7s.home.att.net


> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
> Behalf Of Norman Hockler
> Sent: Sunday, October 12, 2003 12:02 PM
> To: amps@contesting.com
> Subject: [Amps] AMP RATING FOR HEC CERAMIC CAPS
>
>
>
> Hello Amp builders
>
> Looking for the amp rating for HEC HT50  700pf @ 7.5kv.
> Want to run 2 in parallel for blocking C on single 8877.
> Cant find data on the Internet.
>
> Thanks.
>
> Norman N8NH
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>