Strange, mine does this also, with both my old MP and newer MKV. I found
that cycling the bandswitch from 10 to 160, then back rapidly again "fixes"
it.
I have opened up the RF box and looked at the bandswitch, but the contacts
are all still shiny, no burn marks anywhere. If anyone knows anything else
to try, I'd be interested in hearing it as well.
73,
Blake N4GI
----- Original Message -----
From: Marcel Jorba <ea3in@yahoo.com>
To: <amps@contesting.com>
Sent: Monday, October 13, 2003 4:01 PM
Subject: [Amps] Titan 425: High SWR on 28 MHZ
> Hi!
>
> I ask for your help again!
>
> My Titan 425 is showing very high SWR to my FT-1000mp
> so it doesn't drives it most of the time. This only
> happens on 28 MHZ. Time to time the internal tuner
> tunes it and I put aboutt 1KW out, but nothing most of
> the time.
>
> I tried with an FT-990 to discard a misfunction on
> the FT.1000mp and the high SWR is there also on 10 m.
>
> Any help?
>
> Regards
>
> Marcel
>
>
> __________________________________
> Do you Yahoo!?
> The New Yahoo! Shopping - with improved product search
> http://shopping.yahoo.com
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|