Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Fw: Re: Fw: [Amps] Conditioning Spare Tubes After Storage

from [rlm] [Permanent Link][Original]
To: skipp isaham <nospam4me@juno.com>, AMPS <amps@contesting.com>
Subject: Re: Fw: Re: Fw: [Amps] Conditioning Spare Tubes After Storage
From: rlm <r@somis.org>
Date: Wed, 15 Oct 2003 08:23:32 -0700
List-post: <mailto:amps@contesting.com>

On Tuesday, October 14, 2003, at 11:45 AM, skipp isaham wrote:

Hi Dave,

The reason for the "warm up time" is not detailed in the
paperwork I saw/read.

• For tubes without an ion-pump, the reason is akin to knocking on wood?

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] Titan 425: High SWR on 28 MHZ, rlm
Next by Date:  [Amps] Re: HV breakdown tester schematic, Dennis12Amplify
Previous by Thread:  Fw: Re: Fw: [Amps] Conditioning Spare Tubes After Storage, skipp isaham
Next by Thread:  [Amps] Limping Clipperton L, Tim Long
Indexes:  [Date] [Thread] [Top] [All Lists]