Hi Steve,
Steve Thompson wrote::
On Thursday 30 October 2003 10:25, Walter Muth wrote:
Hi,
what would be the best parameters you can give to characterize a
"matched pair " for a high power push-pull amp design ( lets think
about 600watts)
Vgs(th) and gfs ?
Provide separate bias setting pots and there's no need to match Vgs
thats what we did on our old MRF150 amp....
What tolerances may be acceptable?
+/- 10% on gm was a normal selection when I was on that side of things. If the
devices come from the same batch code, use separate bies adjusters and
there's probably no need to do any matching.
thats what a manufacturer told me ...
Thanks
73
Walter
DK1BN
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|