[Amps] Ten Tec 425 amp

["john naberezny" <we2f@arrl.net>]

Hi People,
    does anyone know if there is a subsitute blower available or how to quiet 
down this blower?
    There is a problem on 15 meters(only) with not getting full output. There 
is a big 10 ohm wirewound ceramic resistor in series with the HV (connected in 
series with the plate RF choke), its mounted in front of the blower input, the 
ceramic has flaked off one side....any connection betwixt these ?
         thanks, 73, John
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps